2021 Norstar FLG22 36'

2021 Norstar FLG22 36'

Iron Bull Goosenecks are some of the most rugged and longest lasting units in service today. Decades of experience in our new manufacturing company have combined to create one of the most thought out trailers available. Included on each Iron Bull trailer is a pipe bridge to reduce torque under heavy loads. This pipe is not an option, but standard on every trailer and the heavy SCH40 construction outclasses thin walled pipe as seen on some of the competition. Low-Pro, pierced frame design lowers the deck 3" providing a lower center of gravity, more stable cornering and a lower loading angle for equipment. 12" 19lb/ft I-Beam makes up the main frame of these monsters - compared to the 14lb found on the other guys. Heavy duty 10" I-beam crossmembers are located on the lower main frame to further support the pipe bridge. These important steel beams are omitted by some competitors. 3" Channel crossmembers located in the deck frame are on 16" centers and topped with 2" x 6" treated pine wood and you will find a standard locking toolbox at the front of each gooseneck trailer. Two 16" side steps adorn the front of each deck. Standard -- Not an option -- and oversized to ensure stable footing each and every time you climb on the trailer. All wiring is in a sealed harness and runs inside the 2" x 6" upper deck frame. Sherwin-Williams Powdurda Powder coat gives each trailer a rugged finish with a showroom shine. USA made, lifetime recessed LEDs are provided by TecNic lighting. Each Iron Bull Trailer also comes equipped with stake pockets, pipe spools and rub rails as well as an adjustable coupler. All Iron Bulls are sitting on Dexter Nev-R-Adjust brake axles and roll down the road on radial tires. Select from our multiple tail options including our Rampage Ramps or a hydraulic dove tail and corral your Iron Bull today.

• 12" I-Beam Frame and Neck (19 lbs/ft)

• 2 5/16" Adjustable Coupler

• 3" Structural Crossmembers

• 2.5 x 2.5 Front Bumper Rail

• Lockable Full Neck Width Tool Box

• Rub Rail, Stake Pockets & Pipe Spools

• Standard Torque Tube & Underframe Bridge

• Cambered Dexter Nevr-R-Adjust Brake Axles

• Multi-leaf Slipper Spring Suspension

• E-Z Lube Hubs

• 2 Electric Brake Axles

• 25" Gooseneck Box

• 8' Slide-in Ramps

• 2-10k Drop-Leg Jack

• Treated Pine 2x6 Floor

• 4 Standard 3" D-Rings

• 235/80R16 Radial Tires with 8 Hole Duals

• Lifetime LED Lighting

• All Lighting DOT Approved

• Molded Sealed Harness with Resistors

• 7-Way Receiver Female Plug with Adapter

• Powdura Powder Coat